Ceramic Coating Do It Yourself

Coating Doesn't Have to Be Difficult

DIY ceramic coating may seem complicated, but it is actually easy to do. In the past, many coatings required both training and experience. Today, several user-friendly solutions have emerged that make it possible for anyone to achieve professional results without certification. All you need is patience and a little guidance, and you can successfully apply the coating yourself.

What is Ceramic Coating?

Ceramic coating is the ultimate paint protection. It is an advanced version of paint sealant that creates a permanent film on the car's paint. This film protects the paint from dirt, grime, salt, insects, bird droppings, car scratches and the sun's UV rays. In addition, it provides a beautiful, shiny and smooth surface.

Many coatings claim to reduce car scratches. This is partly true, but you still need to wash your car correctly. The coating makes it harder to get car scratches, but it is not a guarantee that you can wash your car incorrectly.

Benefits of Ceramic Coating

1. Water and dirt repellency Keeps the car clean longer. Makes cleaning easier and faster.
2. Long durability Protects the paint for 1-9 years depending on the product. Coatings with longer durability often require certification.
3. Reduced risk of car scratches The coating provides an extra layer of protection on top of the paint. Less risk of car scratches during hand washing and wiping. Coatings such as Elite and GSo2 have a self-healing effect, which removes light car scratches under heat.
4. Intense gloss Provides a deep and mirror-like finish that looks better than when the car was new.

Ceramic Coating DIY – Preparation

Preparation is the key to a good result. Follow these steps to ensure your car's paint is ready for ceramic coating:

1. Wash the car thoroughly: Make sure to clean all edges and corners so that no dirt remains.
2. Degrease the surface: Use rust and tar remover to remove rust and tar stains.
3. Clean the paint: Use a clay bar to remove ingrained dirt and to make the paint completely smooth.
4. Polishing (optional): Polish the car to remove car scratches, this also removes the last of the ingrained dirt.
5. Degrease the paint again: Use scan inspection spray so that the coating adheres as well as possible to the paint.

Ceramic Coating Do It Yourself - Application

The actual application varies slightly depending on which ceramic coating you have chosen.

NXTZEN 365PRO

A slightly different ceramic coating, as this can be applied directly to the paint, like a spray wax or spray paint sealer, but can also be distributed with an applicator, like all our other coatings.

Remember to store the bottle in the freezer once you have mixed it and are finished using it.

1. Pour the small bottle into the large one.
2. Spray the coating directly onto the paint.
3. Spread the product with a microfiber cloth.
4. Wipe off excess coating without waiting.

NXTZEN Ceramic

1. Apply a thin strip of ceramic coating to the applicator.
2. Squeeze the applicator to distribute the coating evenly. This is only necessary the first time.
3. Apply the coating to one panel at a time. Divide large panels into sections.
4. Use a crisscross pattern to ensure you don't miss any areas.
5. Wait 30-60 seconds.
6. Use two microfiber cloths for wiping: The first cloth removes most of the excess coating. The second cloth removes remaining traces and provides an even finish. Turn the cloths frequently to avoid streaks.

Tips for Better Results

• Work in a dry, dust-free area.
• Ensure proper lighting so you can see where the coating has been applied.
• Always use clean microfiber cloths to avoid scratches.

Finishing - Ceramic Coating do it yourself

With modern ceramic coating, it's easy to achieve professional results, even without experience. Preparation is important, but by following a simple process, you can have a beautiful, protected car. Choose a product that suits your needs and follow the instructions carefully for the best results.

When should you consider a professional coating?

If you are not sure how to do it correctly, or just want to make sure you get the best possible result, it can be a great idea to get help from a professional. While it can be an educational process to do it yourself with ceramic coating , it is also something that requires time and thoroughness.

At Bachs Bilpleje and our other NXTZEN installers , we have the right equipment to apply ceramic coating. This way, you don't have to worry about whether it's done correctly or if there are mistakes, and can just enjoy a lasting result.

Whether you want to do it yourself or have a professional treat your car, Simon is always ready to help you.